A.interface GigabitEthernet 0/0/1
port link-type trunk
trunk allow-pass VLAN 100

B.interface
GigabitEthernet 0/0/1 port link-type
access
port allow-pass VLAN 100

C.interface GigabitEthernet 0/0/1
port link-type trunk
VLAN 100

D.interface GigabitEthernet 0/0/1
port link-type access
GE 0/0/1 Port added to VLAN100 middle()?
port default VLAN 100

A.Huawei indoor AP not support WDS Features

B.WDS Used by default 2.4GHz Band as a bridge band

C.Connect two independent LAN segments through a wireless bridge and provide data transmission between them

D.Scalability is good, and there is no need to lay new wired connections and deploy more

A.Broadband

B.power

C.Gain
).

D.polarity

A.The WMM template is bound to the RF template

B.The user tries his best to ensure that the planning data is detailed when planning the data, which will greatly facilitate the later configuration

C.Before sending the configuration to the AP, the AP must be online

D.Configure the WMM template can be directly bound to the antenna

A.Find APs through multicast and go online automatically

B.Automatically discover the AP and go online normally

C.Automatically discover AP and confirm to go online

D.Add AP offline