Log in to the Huawei OceanStor hybrid flash storage CL window and run the following command:
Admin: />create lun name=asdf pool id=0 capacity=2GB lu_type=thin initial_capacity-1GB dedup_enabled=yes After the configuration is complete, the deduplication data granularity is 64KB. It is recommended to modify it as follows:
Log in to the CLl window of the Huawei OceanStor full-flash storage system and run the following command:
Admin:/>create lun_workload_type general name=test1 io size=64KB dedup_enabled=yes compression_enabled=yes After the configuration is complete, the data deduplication granularity is 64KB.

Due to the approaching of the National Day, equipment maintenance needs to be powered off and then powered on. What is the correct sequence of power-on?

An enterprise uses Huawei hybrid flash memory equipment as a storage system, in which the controller adopts the 1+3 redundancy mode, and the failure of the controller will not affect the performance.

There is a specification limit on the number of consistent splits for the target Huawei storage SmartMigration. When the number of LUNs of an application exceeds the specification, the host service needs to be stopped once to complete the entire split.

In Huawei's active/standby disaster recovery solution, in order to implement one-click disaster recovery operations for Oracle applications, a recovery plan must be configured in BCManager.
Before configuring a recovery plan, which of the following configuration operations need to be performed on the BCManager side? (Multiple Choice)