A.During the survey process, the wiring length must be calculated based on the actual environment.There is no need to consider the wiring length requirements.

B.If the AP requires AC power supply, you need to confirm the location of the power supply. Some locations have special requirements for wiring and require additional marking.

C.Confirm the general rules for wiring. You need to confirm with the owner whether holes can be drilled through the wall, whether open wires can be routed, whether there are conditions for concealed routing, and whether network cables need to use wire troughs or add wire conduits.

D.During outdoor scene survey, there is no need to consider cabling issues when installing outdoor APs.

A.A logical port can only correspond to one sub-interface

B.One logical switch corresponds to one VNI of the device

C.A logical router corresponds to a VPN-instance device

D.A logical switch corresponds to a Bridge-domain device

A.Support dual-active

B.Tenant-level synchronization is not supported

C.Snapshots can be created based on asynchronous RPO policies

D.Support file system level

A.Local AC and Navi AC support the establishment of dual-link backup

B.Local AC and Navi AC need to ensure that the business VLAN, SSID user isolation and authentication method configurations under the corresponding VAP template are consistent.

C.Local AC and Navi AC versions can be guaranteed to be inconsistent

D.Navi AC supports cross-Navi AC roaming

A.True

B.False