The switching capacity of a switch is one of the parameters used to measure product performance. However, the current domestic manufacturers and test methods are different, there is no unified standard, and it does not have much reference significance. In the test of the Ministry of Industry and Information Technology, the switching capacity is declared by the manufacturer itself and cannot be measured. The switching capacity of Huawei box switches is the chip capacity, which has nothing to do with port density and sub-cards. The switching capacity of frame switches is calculated based on the slot bandwidth of each slot hardware connector design.

AirEngine8760R-X1 has built-in lightning protection, while AirEngine8760R-X1E has external lightning protection.

The link utilization rate of traditional networks is only 20%-30%. Huawei's agile wide area solution is based on the SDN architecture, which integrates factors such as bandwidth, latency, and cost, and globally calculates routes to achieve reasonable scheduling of business traffic, thereby increasing network utilization to more than 70%.

Data center switches have switched to the N1 quotation mode starting from the self-developed models. The different software packages of N1 are just different combinations of different Lincense. There is no essential difference from the traditional software quotation mode. If it is a solution sales, the controller software needs to be configured separately.

Huawei LAN exclusively supports two coverage modes: wide-angle omnidirectional and small-angle high-density.