Media contention occurs when two or more network devices have data to send at the same time. Because multiple devices cannot talk on the network simultaneously, some type of method must be used to allow one device access to the network media at a time. This is done in two main ways: carrier sense multiple access collision detect (CSMA/CD) and token passing.
In networks using CSMA/CD technology such as Ethernet, network devices contend for the network media. When a device has data to send, it first listens to see if any other device is currently using the network. If not, it starts sending its data. After finishing its transmission, it listens again to see if a collision occurred. A collision occurs when two devices send data simultaneously. When a collision happens, each device waits a random length of time before resending its data. In most cases, a collision will not occur again between the two devices. Because of this type of network contention, the busier a network becomes, the more collisions occur. This is why performance of Ethernet degrades rapidly as the number of devices on a single network increases. In token-passing networks such as Token Ring and FDDI, a special network frame called a token is passed around the network from device to device. When a device has data to send, it must wait until it has the token and then sends its data. When the data transmission is complete, the token is released so that other devices may use the network media. The main advantage of token-passing networks is that they are deterministic. In other words, it is easy to calculate the maximum time that will pass before a device has the opportunity to send data. This explains the popularity of token-passing networks in some real-time environments such as factories, where machinery must be capable of communicating at a determinable interval. For CSMA/CD networks, switches segment the network into multiple collision domains. This reduces the number of devices per network segment that must contend for the media. By creating smaller collision domains, the performance of a network can be increased significantly without requiring addressing changes.
The following are incorrect answers: LAN topologies: Think of a topology as a network's virtual shape or structure. This shape does not necessarily correspond to the actual physical layout of the devices on the network. For example, the computers on a home LAN may be arranged in a circle in a family room, but it would be highly unlikely to find a ring topology there. Common topologies are: bus, ring, star or meshed. See THIS LINK for more information. LAN transmission methods: refer to the way packets are sent on the network and are either unicast, multicast or broadcast. See THIS LINK for more information. Contention Access Control: This is a bogus detractor. Contention is a real term but Contention Access Control is just made up. Contention methods is very closely related to Media Access Control methods. In communication networks, contention is a media access method that is used to share a broadcast medium. In contention, any computer in the network can transmit data at any time (first come-first served). This system breaks down when two computers attempt to transmit at the same time. This is a case of collision. To avoid collision, carrier sensing mechanism is used. Here each computer listens to the network before attempting to transmit. If the network is busy, it waits until network quiets down. In carrier detection, computers continue to listen to the network as they transmit. If computer detects another signal that interferes with the signal it is sending, it stops transmitting. Both computers then wait for random amount of time and attempt to transmit. Contention methods are most popular media access control method on LANs.
Reference(s) used for this question: http://docwiki.cisco.com/wiki/Introduction_to_LAN_Protocols#LAN_Media-Access_Methods http://en.wikipedia.org/wiki/Contention_%28telecommunications%29

Explanation/Reference:
Explanation:
When products are evaluated for the level of trust and assurance they provide, many times operational assurance and life-cycle assurance are part of the evaluation process.
Operational assurance concentrates on the product's architecture, embedded features, and functionality that enable a customer to continually obtain the necessary level of protection when using the product.
Examples of operational assurances examined in the evaluation process are access control mechanisms, the separation of privileged and user program code, auditing and monitoring capabilities, covert channel analysis, and trusted recovery when the product experiences unexpected circumstances.
Life-cycle assurance pertains to how the product was developed and maintained. Each stage of the product's life cycle has standards and expectations it must fulfill before it can be deemed a highly trusted product. Examples of life-cycle assurance standards are design specifications, clipping-level configurations, unit and integration testing, configuration management, and trusted distribution. Vendors looking to achieve one of the higher security ratings for their products will have each of these issues evaluated and tested.
Incorrect Answers:
A: Architectural Assurance is not one of the two types of system assurance defined in the Orange Book.
B: Design Assurance and Implementation Assurance are not the two types of system assurance defined in the Orange Book.
C: Architectural Assurance and Implementation Assurance are not the two types of system assurance defined in the Orange Book.
References:
Harris, Shon, All In One CISSP Exam Guide, 6th Edition, McGraw-Hill, New York, 2013, p. 1240

Various officials and organizational offices are typically involved with computer security. They include the following groups: Senior management Program/functional managers/application owners Computer security management Technology providers Supporting organizations Users Senior management has the final responsibility through due care and due diligence to preserve the capital of the organization and further its business model through the implementation of a security program. While senior management does not have the functional role of managing security procedures, it has the ultimate responsibility to see that business continuity is preserved.