A.A path definition can be configured with loose hops only.

B.A path definition is not required if CSPF is enabled on an LSP.

C.A path definition can have both loose and strict hops.

D.A path definition is configured on the head-end router only,

A.ISIS, RIP, OSPF, static routes, OSPF3

B.ISIS, RIP, OSPF, static routes

C.BGP, RIP, OSPF, static routes, OSPF3

D.BGP, ISIS, RIP, OSPF, static routes

A.The MPLS control word is required because the Frame Relay header is not encapsulated in the frame.

B.To the customer, the PE appears as a native Frame Relay UNI (User Network Interface).

C.F-pipes use SAPs in the form of port: DLCI (e.g. 1/2/3:65).

D.Multiple Frame Relay circuits can be mapped to a single F-pipe service on the Alcatel-Lucent 7750 SR.

A.The convergence time depends on the value of the BFD interval and multiplier settings on routers R1 andR3.

B.The convergence time depends on the time taken by the switches to detect the link failure.

C.The convergence time depends on the value of the OSPF hello timers and Dead interval on routers R1 and R3.

D.The convergence time depends on the value of the OSPF hello timers on routers R1 andR3.

A.All of the above statements are false

B.PE routers must be configured to run MP-BGP and IPv6

C.None of the above statements are false.

D.The provider core must be configured to support IPv6

E.PE-to-CE BGP sessions need to be configured to support IPv6.

F.MP-BGP sessions need to be configured in the service provider network to support a VPN-IPv6 address family.