A.Once the SDP is configured on both PE routers, both the services will be operationally up without further configuration changes.

B.The Layer 2 MTU must be 14 bytes smaller on the VPLS than it is on the IES.

C.The SDP must be a spoke.

D.The SDP must be a mesh

E.The Layer 2 MTUs must match between the IES and the VPLS

A.Independent control mode

B.Ordered control mode

C.Liberal label retention mode

D.Conservative label retention mode

A.Request a new label from the peer that provided this label.

B.A router will never receive a packet containing this label value.

C.Pop the label.

D.PUSH an additional label onto the label stack.

E.Signal a new label to the peer that sent the packet.

A.Either RSVP or LDP

B.TLDP

C.M-BGP

D.PPP

E.RSVP

F.IPCP

A.The router has not received a valid OSPF Hello packet from its neighbor.

B.The interface is included in a different area than the neighbor router.

C.The interface facing the neighbor is down.

D.An OSPF database description packet has not been received from the neighbor.