A.P devices must be aware of the VPRNs.

B.P devices must support MP-BGP.

C.P devices are not required to be MPLS-enabled.

D.P devices participate in service provider core routing.

A.prioritization of traffic flows

B.separation between the data plane and the control plane

C.packet filtering

D.OAM functionality

E.least cost routing

A.Lower BGP router ID is preferred over higher BGP router ID .

B.Higher MED is preferred over lower MED

C.Higher origin code is preferred over lower origin code.

D.Lower local preference is preferred over higher local preference.

A.Adding or removing a node may require several network touches.

B.Adding or removing a service may require several network touches.

C.Provisioning is a factor for all Ethernet services.

D.Adding or removing a SAP may require several network touches.

E.Adding or removing an Epipe may require several network touches.

A.A full mesh of iBGP peering sessions is not required,

B.Edge and transit routers need to be configured with BGP.

C.MPLS tunnels are used to carry transit traffic across the network.

D.The transit routers need to support LDP or RSVP-TE LSPs.