A.The MDU does not need to support MPLS.

B.Does not require the use of a layer 2 loop prevention protocol such as RSTP

C.The MDU does not have to be aware of the active/standby configuration

D.Can be used in ring networks of 4 or more nodes

A.Well-known mandatory attribute.

B.Optional transitive attribute.

C.Well-known discretionary attribute.

D.Optional non-transitive attribute.

A.The SAP-egress policy

B.The slope-policy

C.The scheduler-policy

D.The SAP-ingress policy

E.The network-queue policy

A.PE-1 must be configured with mesh-SDPs to every node receiving the multicast traffic. There is no way to reduce the replication or bandwidth.

B.PE nodes in Metro 1 could be configured with mesh-SDPs. PE nodes in Metro 2 would be configured with mesh-SDPs. However, the connection between Metro networks (PE-2 to PE-6) can be configured with a spoke-sdp. This would reduce the replication and bandwidth used on the link between Metro networks. This also reduces the replication required by PE-1.

C.PE-1 can be configured with spoke-SDPs to every PE node in both Metro networks. This will reduce the bandwidth and replication within the network.

D.PE nodes in Metro 1 could be configured with spoke-SDPs. PE nodes in Metro 2 would be configured with spoke-SDPs. However, the connection between Metro networks (PE-2 to PE-6) can be configured with a mesh-sdp. This would reduce the replication and bandwidth used on the link between Metro networks. This also reduces the replication required by PE-1.

A.Show service 3 base

B.Show service id 3 detail

C.Show service id 3

D.Show service 3 detail

E.Show service 3

F.Show service id 3 base