A.Bridge E 1/1/1

B.Bridge E 1/1/3

C.Bridge C 1/1/2

D.Bridge C 2/1/1

E.Bridge D 1/1/1

F.Bridge B 1/1/3

G.Bridge B 1/1/2

H.Bridge D 1/1/3

A.200

B.300

C.None

D.100

A.Uses the RSVP protocol to create macroflows through a network.

B.Has the ability to distinguish traffic in 32 different ways.

C.Has the ability to manually configure foiwarding classes through a network.

D.Uses the RSVP protocol to create microflows through a network.

A.The route is moved to the route table, but not to the FIB.

B.The route is moved to the LOC-RIB, but not marked as a used route.

C.The route is kept in the RIB-In, but marked as an invalid route.

D.The route is discarded.

A.Learning should be disabled on both SAPs connected to the DPI device to prevent FDB instability

B.An IP filter should be applied to both SAPs connected to the DPI to prevent FDB instability

C.A MAC filter should be applied to both SAPs connected to the DPI to limit MAC learning on the port

D.The SAPs connected to the DPI should be configured with the "discard-unknown" feature to limit MAC learning on the port