https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000Clp3CAC

C: OSPFv3 provides support for the OSPF routing protocol within an IPv6 network. As such, it provides support for IPv6 addresses and prefixes.
A: How to Set Default Route for IPv6 Traffic
Steps
1. Go to Network > Virtual Router
2. Add a Virtual Router and go to Static Routes > IPv6.
3. Add a Static Route:
E. Set destination (example, IPV4 0.0.0.0/0) as ::0/
F. Select the Interface
G. Set the Next Hop IP address

According to the Palo Alto Networks Compatibility Matrix, the three platforms that support PAN- OS 10.2 are:
- PA-800 Series2
- PA-2202
- PA-3400 Series2
The PA-5000 Series and PA-500 do not support PAN-OS 10.2. To upgrade devices to PAN-OS
10.2 using Panorama, you need to determine the upgrade path, upgrade Panorama itself, and then upgrade the firewalls using Panorama.
https://docs.paloaltonetworks.com/compatibility-matrix/supported-os-releases-by-model/palo-alto- networks-next-gen-firewalls

The WildFire verdicts are: Benign, Grayware, Malware.
https://docs.paloaltonetworks.com/pan-os/11-1/pan-os-admin/monitoring/view-and-manage- logs/log-types-and-severity-levels/wildfire-submissions-logs

Redundancy ensures that no logs are lost if any one Log Collector becomes unavailable.
https://docs.paloaltonetworks.com/panorama/9-1/panorama-admin/manage-log- collection/manage-collector-groups/configure-a-collector-group