By default, Wireshark will only dissect port 443 traffic as SSL/TLS traffic. If you are using another port for SSL/TLS communications, you must add that port number in the HTTP preferences setting for SSL/TLS ports.

When you apply a display filter, the Status Bar indicates the total number ofpackets captured and the packets displayed.

Window scaling is established during the TCP handshake process to enable hosts to use larger window sizes than is 65,535.

You can use the display filter ss1. record.content_type = =22 to view just the SSL/TLS handshakepackets.

Which network problem may cause packet loss, queuing, or throttling of possible throughput maximums?