* [root@node1 ~]# curl http://node1.domain15.example.com
curl: (7) Failed to connect to node1.domain15.example.com port 80: Connection refused
[root@node1 ~]# yum install httpd
[root@node1 ~]# systemctl enable --now httpd
Created symlink /etc/systemd/system/multi-user.target.wants/httpd.service → /usr/lib/systemd/system/httpd.service.
[root@node1 ~]# systemctl start httpd
[root@node1 ~]# systemctl status httpd
Status: "Running, listening on: port 80"
* [root@node1 ~]# wget http://node1.domain15.example.com
2021-03-23 13:27:28 ERROR 403: Forbidden.
[root@node1 ~]# semanage port -l | grep http
http_port_t tcp 80, 81, 443, 488, 8008, 8009, 8443, 9000
[root@node1 ~]# semanage port -a -t http_port_t -p tcp 82
[root@node1 ~]# semanage port -l | grep http
http_port_t tcp 82, 80, 81, 443, 488, 8008, 8009, 8443, 9000
[root@node1 ~]# firewall-cmd --zone=public --list-all
[root@node1 ~]# firewall-cmd --permanent --zone=public --add-port=82/tcp
[root@node1 ~]# firewall-cmd --reload
[root@node1 ~]# curl http://node1.domain15.example.com
OK
* root@node1 ~]# wget http://node1.domain15.example.com:82
Connection refused.
[root@node1 ~]# vim /etc/httpd/conf/httpd.conf
Listen 82
[root@node1 ~]# systemctl restart httpd
[root@node1 ~]# wget http://node1.domain15.example.com:82
2021-03-23 13:31:41 ERROR 403: Forbidden.
[root@node1 ~]# curl http://node1.domain15.example.com:82
OK

see explanation below.
Explanation
1. chmod g+s /data
2. Verify using: ls -ld /data
Permission should be like this: drwxrws--- 2 root sysadmin 4096 Mar 16 18:08 /data If SGID bit is set on directory then who every users creates the files on directory group owner automatically the owner of parent directory. To set the SGID bit: chmod g+s directory To Remove the SGID bit: chmod g-s directory

1. Use fdisk /dev/hda to create new partition.
2. Type n For New partitions.
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M you can specify either Last cylinder of size here.
6. Press P to verify the partitions lists and remember the partitions name.
7. Press w to write on partitions table.
8. Either Reboot or use partprobe command.
9. Use mkfs -t ext3 /dev/hda?
OR
mke2fs -j /dev/hda? To create ext3 filesystem.
vi /etc/fstab
Write:
/dev/hda? /data ext3 defaults 1 2
Verify by mounting on current Sessions also: mount /dev/hda? /data

see explanation below.
Explanation
Download the file to /tmp first
grep [abcde] /tmp/testfile > /mnt/answer

See explanation below.
Explanation/Reference:
Explanation:
cd /usr/local
tar -jcvf /root/backup.tar.bz2
mkdir /test
tar -jxvf /root/backup.tar.bz2 -C /test// Decompression to check the content is the same as the /usr/loca after If the questions require to use gzip to compress. change -j to -z.