In LEED-certified projects, residential buildings (D) are the exception to the rule prohibiting smoking inside buildings. For residential projects, the standard is modified to require designated smoking areas with special ventilation or separation rather than a complete ban, as smoking regulations in residential settings often involve tenant rights and are treated differently than commercial or institutional buildings. LEED requires that precautions be taken to control environmental tobacco smoke migration in multifamily residential projects to protect air quality in common areas.

Pilot Credit registration is required when documenting a LEED Pilot credit. This is to ensure that the project team has access to the latest pilot credit language and requirements, and that USGBC can track the usage and feedback of the pilot credits. The other options are not required for documenting a pilot credit, although they may be helpful or applicable for other credits.

Furniture is the only type of product that needs to be evaluated for both VOC content and VOC emissions in the LEED BD+C Low-Emitting Materials credit. Flooring, composite wood, and wet applied products only need to meet the VOC content requirements, while other types of products, such as ceilings, walls, thermal and acoustic insulation, and exterior applied products, only need to meet the VOC emissions requirements1.

An intensive vegetated roof is a roof that has a thick layer of soil and plants that provide shade, evapotranspiration, and stormwater management. It can reduce the heat island effect by lowering the surface and air temperature of the roof and the surrounding area. Artificial turf grass does not reduce the heat island effect because it is not a living plant and does not provide cooling benefits. A steep sloped roof with initial SRI of 35 does not meet the minimum requirement of 39 for Option 1 or 32 for Option 2 of the Heat Island Reduction credit. A low sloped roof with initial SRI of 64 exceeds the minimum requirement of 82 for Option
1 or 64 for Option 2, but it is not the best option among the choices because it only reflects solar radiation and does not provide other benefits such as shading, evapotranspiration, and stormwater management. References:
* Heat Island Reduction credit in LEED BD+C: New Construction v4.1 - LEED v4.11
* SpecTopics: Heat Island Reduction Credit and LEED V4/V4.12
* LEED Principle: Urban Heat Island Mitigation and Roofing3

The Indoor Air Quality Assessment credit under LEED v4.1 BD+C rating system (Building Design and Construction) seeks to establish better quality indoor air in the building after construction and during occupancy. The credit provides two options for compliance, which cannot be combined1. Therefore, Indoor Environmental Quality test results would be required for credit compliance.