A minimum program requirement for LEED for New Construction and Major Renovations projects is to be a permanent building or space on existing land. This means that the project must be designed and constructed for a fixed location on land that is legally defined and has legal boundaries. The project cannot be a temporary structure, such as a trailer or a tent, or a movable structure, such as a boat or a vehicle. The LEED Green Associate Candidate Handbook states that this is one of the four minimum program requirements that apply to all LEED rating systems [1, p. 9]. References: LEED Green Associate Candidate Handbook, [Minimum Program Requirements | U.S. Green Building Council]

A brownfield site is appropriate for development of LEED projects because it is a site that has been previously used for industrial or commercial purposes and may be contaminated by pollutants or hazardous substances. Developing a brownfield site can help reduce environmental impacts, such as soil erosion, habitat loss, and water consumption, by reusingexisting infrastructure and restoring degraded land. LEED projects can earn credits for developing on brownfield sites under the Sustainable Sites category. References: LEED v4 BD+C Reference Guide, Sustainable Sites, page 35; Best Management Practice #14: Alternative Water Sources1

Building-Level Water Metering is a prerequisite in LEED v4 Water Efficiency category. Building-Level Water Metering means that the project must install permanent water meters that measure the total potable water use for the building and associated grounds. The project must also commit to sharing the water usage data with USGBC for at least five years after occupancy or certification. The LEEDGreen Associate Candidate Handbook states that this is one of the two prerequisites in the Water Efficiency category [1, p.
14]. References: [LEED Green Associate Candidate Handbook], [Building-Level Water Metering | U.S.
Green Building Council]

ASHRAE 62.1 is the standard for ventilation and acceptable indoor air quality in commercial and institutional buildings. It specifies the minimum ventilation rates and other measures to provide good indoor air quality for occupants. LEED v4 references ASHRAE 62.1 as a prerequisite for the Indoor Environmental Quality credit category.
ASHRAE 62.1 from the LEED v4 Green Associate Candidate Handbook, page 18.
Enhance Indoor Environmental Quality (IEQ) from the WBDG website, section on Adequate Ventilation and Exhaust.

The coordination of building and site systems should be addressed at the predesign stage to maximize the impact of integrative process. The integrative process is a method of design and construction that involves the collaboration and coordination of all project stakeholders from the beginning to achieve the project's sustainability goals1. The predesign stage is the earliest phase of the project, where the project vision, scope, budget, schedule, and performance targets are defined2. By addressing the coordination of building and site systems at this stage, the project team can identify and analyze the interrelationships and synergies among various systems, such as energy, water, materials, indoor environmental quality, and site ecology3. This can help the team to optimize the design solutions, reduce costs and risks, enhance performance and quality, and avoid rework and conflicts later in the projec