Online Access Free API-570 Exam Questions

To evaluate the effects of fire damage, an assessment should be performed in accordance with____.

• A.ASME 816.5
• B.API RP 2207 Section 2
• C.API RP 579, Section 11
• D.API 598, Section 1

What should have been the correct number and type of guide bends on the PQR?

• A.2 face and 2 root bends
• B.1 side, 1 face and 1 root bend
• C.6 side bends
• D.No side bends required

A weld is changed from multi pass per side to single pass per side.
How does this effect the PWHT limitation?

• A.The PWHT is not a consideration
• B.The PWHT must be performed per ASME IX and time increased byone
• C.This limitation does not apply when a WPS is qualified with a PWHT above the upper transformation temperature
• D.This limitation does not apply when a WPS is qualified with a PWHT below the upper transformation temperature

With respect to Category 'D' service, what is the maximum allowable undercut for a branch connection?

• A.£ 1/32"
• B.Zero (no evident imperfections)
• C.£ 1 mm
• D.Both B and C

Exemptions for preheating and post weld heat treatment must be approved by the____.

• A.applicable standard, API 570
• B.repair procedure.
• C.piping engineer
• D.inspector