Online Access Free 6006-1 Exam Questions

Avaya recommends that the technician checks the "Latest Communication Manager Software and Firmative Compatibility Matrix" for software not formative compatibility.
What may occur if LSPs or ESS servers are running a different software load than the main server?

• A.No issue will occur because of backward compatibility between the gateway and media firmware.
• B.May occur split registration because of the incompatible software versions.
• C.May cause transaction corruption because of the synchronization between the primary controller and the LSPs /ESS server.
• D.No issue will occur because of primary controller will not attempt synchronization to LSPs or ESS servers that have incompatible software.

Communication Manager does not appear to be running. A technician wants to verify that all of the applications have started and are up. There is no access through the system Management interface so logging into Linux is used to check this.
Which two Linux commands will give the output needed to verify this? (Choose two)

• A.statapp
• B.statserver
• C.statuslicense
• D.systat

A technician is testing calls from IP phones at a remote location on a G450/LSP to main location served by S83XX/G450 over the WAN. Busy tones are received when multiple calls between the two locations are already active. The network regions and G 711 and G 729 codec set have been set up.
Which two steps must be taken to ensure the branch IP phones are using the minimum WAN bandwidth when calling main location stations? (Choose two)

• A.Verify calls between NR1 and NR2 use G729 codec in IP-network-region 1 form
• B.Use the IP-network map form to assign the branch IP phones to network region 2.
• C.Assign G.729 as primary codec in station form for the branch IP phones.
• D.Create a third codec Set and assign to the G450 gateway in IP-network-region 2 form.
• E.Assign branch IP phones to the G450 LSP as its call server in IP-network-region-2 form.

A customer wants to change the number of rings for all extensions in the customer's helpdesk before the system redirects the Communication Manager Messaging (CMM) system. All extensions of the helpdesk belong to COS 3 and coverage Path 99.
Which command must be used to change the number of rings?

• A.Change cos
• B.Change coverage path 99
• C.Change coverage path 3
• D.Change system-parameters coverage-options

A technician has a communication Manager running on S87xx server, G850 Gateway. Most of the phones are H.323 IP 46xx and 96xx series. Upon testing, it is discovered that all the IP phones have no dial tone. All of the hardware has been verified to be working properly.
Which two steps should be taken to identify the cause of problem? (Choose two)

• A.Set a static IP address on the laptop and see if the TN799 board can be pinged.
• B.Verify that the MedPro Board has the correct IP settings
• C.Set a static IP address on the laptop and see if the TN3212 Board can be pinged.
• D.Set a static IP address on the laptop and see if the TN3202 or TN2602 boards can be pinged.