Online Access Free 6103 Exam Questions

A technician has implemented RSMLT edge design. After recovering from a power outage, some clients could not communicate. It has been determined that only one of the core RSMLT switches has recovered.
What should have been done to prevent the loss of communications?

• A.RSMLT-Edge needs to be enabled globally.
• B.Turn off the HoldDown timer.
• C.Clear the peer IP and MAC addresses.
• D.Set the VLAN to copy RSMLT info from a similarly configured VLAN.

Which statement describes how to configure Simple Loop Prevention protocol (SLPP) Rx?

• A.SLPP is configured on the core switch cluster ports that connect to the edge switch.
• B.SLPP is configured on the Inter Switch Trunk (IST) ports of the core switch cluster.
• C.SLPP is configured on the uplink ports of both the core switch cluster and the edge switch.
• D.SLPP is configured on the edge switch ports that connect to the core switch cluster.

The VSP9000 uses three distinct traffic management profiles, configured with the boot config flag fabric-profile command.
What is the default profile in the VSP9000?

• A.Multicast Optimized
• B.Unicast Optimized
• C.Balanced Profile
• D.None, the profile must be set

A customer is mirroring multiple ports to a single monitor port.
What happens if the mirrored traffic exceeds the bandwidth of the monitor port?

• A.The excess traffic will be dropped randomly.
• B.The excess traffic will be dropped based upon the port priority of the ingress port.
• C.The traffic will be buffered until there is available bandwidth.
• D.The excess traffic will be dropped based upon the mirror priority of the ingress port.

Given the following command:
VSP-9012:1S show khi performance
Which Key Health Indicator is only valid for the CP modules?

• A.error-count
• B.memory
• C.buffer-pool
• D.process
• E.CPU