Online Access Free 7003.1 Exam Questions

A customer has successfully installed a Common Processor Media Gateway (CPMG) in a Communication Server (CS) 1000E system. The MGC has registered with the Call Server.
What is displayed on the CPMG LED display to confirm successful registration?

• A.The MGC display will show Superloop and shelf number of MG 1000E
• B.The MGC display will read "PASS"
• C.The MGC display will read "Exxx" (E000)
• D.The MGC display will read "LOAD"

A customer has installed a Media gateway controller (MGC) and would like to change the baud rate settings for the SDI parts. The baud rates for all serial Data Interface (SDI) ports on the MGC are configurable through call server?
Which overlay is used to configure the MGC SDI ports?

• A.LD 137
• B.LD 97
• C.LD 17
• D.LD 117

A technician has just installed and configured a System Manager as the primary security Server and configured a Member Security Server with the Element Manager and Subscriber Manager Applications deployed. The Communication Server (CS) 1000E Rls. 7x Call Server is part of this server security domain. All connections are up and running. When the new CS 1000 Rls. 7x system link on the elements window is clicked, the web browser returns with the following message.
"Destination IP address cannot be reached"
What is causing the problem?

• A.The wrong Call Server IP address was entered during the application deployment.
• B.The Element Manager is unable to reach the MC32S via the ELAN.
• C.The browser window has not been refreshed.
• D.The Public Key Certificates for Web SSL were not added in the Call Server.

A customer has a Communication Server (CS) 1000Rls. 7x system and installing a stand-alone CPDC Signaling Server.
Which role should be chosen during the IP Telephony node Configuration?

• A.Leader
• B.Alternate
• C.Backup
• D.Follower

A customer with a Communication Server (CS) 1000E at Rls. 5.5 with two IPMG is upgrading the system to CS 1000E SA release 7 x. The second media gateway includes a media Gateway Controller card with one high density DSP daughter board.
How many voice channels does this configuration provide?

• A.32
• B.64
• C.128
• D.96