Audio detection in Axis cameras is used to detect changes in decibel levels, which can indicate unusual or noteworthy events such as alarms, breaking glass, or raised voices. This functionality does not necessarily require a built-in microphone; it can also work with external microphones. The primary function is to trigger alerts or recordings based on significant changes in the audio environment. Axis Network Video documentation outlines the use of audio detection for enhancing security by monitoring for specific sound patterns or levels.

A system designer can compare the light sensitivity of network cameras from different manufacturers by checking the specified lux values of the cameras. Lux is a unit of measurement for illuminance, indicating how much light is needed for the camera to produce a usable image. Lower lux values indicate better low-light performance. While field testing can also be useful, lux values provide a standardized and quick reference for comparison. References: Axis Communications product specifications and industry standards on light sensitivity.
Top of Form
Bottom of Form

When setting up PTZ control for an Axis encoder, after connecting the communication wires, it is crucial to set the Baud Rate to match the analog PTZ's. This step ensures proper communication between the encoder and the PTZ camera. The Baud Rate must align with the camera's communication settings to function correctly. For more detailed setup instructions, refer to the Axis Communications installation guides and user manuals for PTZ configuration.

As a person enters the scene, P-frames (Predictive frames) increase in size. P-frames contain only the changes in the image from the previous frame (I-frame or another P-frame). When there is movement or new objects enter the scene, more data is needed to describe the changes, resulting in larger P-frames. References: Axis Communications documentation on video compression and frame types in H.264.

When upgrading an analog system to IP using encoders, the end of the analog signal must be terminated with a 75 # resistor. This standard impedance ensures proper signal transmission and prevents signal reflections that can degrade the video quality. Terminating the signal correctly is crucial for maintaining the integrity of the video feed in an analog to IP conversion. For more information, refer to Axis Communications' technical documentation on analog to IP conversion and signal termination.