Online Access Free 150-620 Exam Questions

Referring to the exhibit, why are the FC links failing to come up?

• A.FC-to-FC ports only can be configured if the RBridge IDs of both Brocade VDX switches have matching RBridge IDs.
• B.FC ports can only be used for FC host/storage device types.
• C.The FC ports can only be used as an E_Port on the Brocade VDX switch to a Brocade FC router.
• D.FC-to-FC ports are only 8 Gbps capable, and do not meet the minimum bandwidth requirements for the cluster.

You are in the implementation stage of a new network build, Your VM server team is ready to physically connect and configure their servers on the Brocade VCS Fabric. Which three steps must be completed? (Choose three.)

• A.Enable license.
• B.Set the VCS Fabric ID.
• C.Enable Standalone mode.
• D.Enable VCS Fabric mode.
• E.SettheRBridge ID.

You are interested in carrying iSCSI traffic in a Brocade VCS Fabric with NOS v2.1.1.
Which two iSCSI features are supported? (Choose two.)

• A.iSCSI gateway to FC SAN
• B.10GbpsDCB
• C.iSCSITLV for VCS mode
• D.CoS value of 7

You have an existing Brocade VCS Fabric and are in the process of adding an additional RBridge.
The existing fabric has a zoning configuration enabled and has the default zoning mode set to no access. When connected, the new RBridge is segmented.
Which configuration entry on the new
RBridge would cause it to segment?

• A.PFC has been turned on for the FCoE CoS priority.
• B.The default zone mode is set to no access.
• C.Zone members in the local zones have members that are listed in a different
• D.It has a conflicting Virtual IP configured in the existing Brocade VCS Fabric.

In the exhibit, what is the maximum number of ports that can actively send traffic from the Brocade Ethernet Fabric to the Core Network?

• A.4
• B.1
• C.2
• D.3