Explanation
A PHY header is added to the PSDU at the PHY layer. A PHY header is a part of the PPDU that contains information such as modulation, coding, and data rate. The PHY header is added by the PHY layer when it converts a PSDU to a PPDU for transmission, or removed by the PHY layer when it converts a PPDU to a PSDU for reception. The other layers do not add or remove a PHY header. References: [Wireless Analysis Professional Study Guide CWAP-404], Chapter 4: 802.11 Physical Layer, page 97-98

Explanation
The statement that the Frame Control field contains subfields, and some 1-bit flags is true. The Frame Control field is a 2-byte field in the MAC header that contains information about the type, subtype, and characteristics of a frame. The Frame Control field is divided into several subfields, each with a specific function and length.
Some of these subfields are 1-bit flags, which can be set to 0 or 1 to indicate a certain condition or status. For example, the To DS and From DS subfields are 1-bit flags that indicate whether a frame is destined for or originated from the DS (Distribution System). The other statements are not true, as they do not describe the Frame Control field correctly. All types of frames (management, control, and data) have a Frame Control field, not just control frames. The Frame Control field is not used to communicate the duration value, which is a separate field in the MAC header. The Frame Control field is not always set to 0, as it varies depending on the type, subtype, and characteristics of each frame. References: [Wireless Analysis Professional Study Guide CWAP-404], Chapter 5: 802.11 MAC Sublayer, page 113-114

Explanation
The CRC is calculated over the MAC Header and Frame Body only. The CRC (Cyclic Redundancy Check) is a 32-bit value that is used for error detection in wireless transmissions. The CRC is calculated over the MAC Header and Frame Body of a PSDU, which are the parts of the data unit that contain information such as source and destination addresses, frame type, frame control, sequence number, payload, etc. The CRC is appended to the end of the PSDU as a FCS (Frame Check Sequence) field. The CRC is not calculated over the PHY Header or PHY Preamble, which are parts of the PPDU that contain information such as modulation, coding, data rate, etc. The PHY Header and PHY Preamble are added or removed by the PHY layer during the conversion between PSDU and PPDU. References: [Wireless Analysis Professional Study Guide CWAP-404], Chapter 4: 802.11 Physical Layer, page 97-98