Online Access Free CWDP-303 Exam Questions

Who should be in the final meeting from the customer-side after successfully implementing a WLAN infrastructure?

• A.End-users
• B.The customer's customers
• C.CEO or CFO
• D.Remote workers

When deploying a new WLAN infrastructure using PoE to power the APs, you realize that a known good AP is not powering up. You use the same cable to connect your laptop and connect without any trouble. What is the most likely reason the AP did not power up?

• A.Layer 3 routing
• B.Lack of PoE budget on the switch
• C.Spanning-tree convergence
• D.Missing AP licenses in the controller

Your customer's 802.11n laptops are not able to see the SSID in the 5 GHz band in the conference room.
When doing a walkthrough using one of these laptops, you confirm that it is unable to see the SSID in the 5 GHz band in the conference room. When using your own 802.11 ac laptop, you're able to see the SSID. What is the most likely cause of this problem?

• A.Their laptops are SISO clients
• B.The AP is on channel 144
• C.The AP is configured to use channel 36
• D.The customer laptop does not support Transmit Beamforming

You're about to deploy an Enterprise-class VoWLAN infrastructure. You need to ensure that QoS is properly configured throughout the network. What Access Category (AC) should voice frames/packets use?

• A.AC_VI
• B.AC_BE
• C.AC_BK
• D.AC_VO

After importing a floor plan to a predictive design tool, what should be done prior to adding APs, antennas and attenuators (e.g., walls)?

• A.Calibrate the floor plan to increase accuracy
• B.Set the transmit power for all APs
• C.Nothing; just begin by adding APs, antenna and attenuators
• D.Add pictures of the environment