Online Access Free CWNA-109 Exam Questions

In addition to coverage analysis results, what should be included in a post-deployment site survey report to ensure WLAN users experience acceptable performance?

• A.Application Layer protocol availability analysis results
• B.Layer 4 protocol availability analysis results
• C.WAN interface analysis results
• D.Capacity analysis results

You are installing an AP to be used by 27 laptops. All laptops will connect on the 5 GHz frequency band. A neighbor network uses channels 1 and 6. What channel should be used for this AP and why?

• A.Channel 11, because channels 1 and 6 are in use nearby
• B.Channel 6, because it is always best to use this channel
• C.Channel 1, because it is best to use the channel with the lowest frequency
• D.A 5 GHz channel, because channels 1 and 6 are 2.4 GHz channels they have no impact on the decision

A dual-band 802.11ac AP must be powered by 802.3at PoE. As a class 4 device, what minimum power level should be received at the AP?

• A.12.95 W
• B.15.4 W
• C.25.5 W
• D.30 W

During a post-implementation survey, you have detected a non-802.11 wireless device transmitting in the area used by handheld 802.11g scanners. What is the most important factor in determining the impact of this non-802.11 device?

• A.Airtime utilization
• B.Receive sensitivity
• C.Channel occupied
• D.Protocols utilized

You are troubleshooting a controller-based AP that is unable to locate the controller. DHCP is not use and the controller is located at 10.10.10.81/24 while the AP is on the 10.10.16.0/24 network.
What should be inspected to verify proper configuration?

• A.DNS
• B.NTP
• C.AP hosts file
• D.BOOTH