The inverse square law states that the signal strength of an RF wave is inversely proportional to the square of the distance from the source. This means that as the distance from the transmitter increases, the signal strength decreases rapidly.
References: Wireless Network Administrator Official Study Guide, Chapter 3, page 64.

Refraction is the bending of an RF signal as it passes through a medium with a different density than free space. This can cause the signal to change its direction and speed, which can affect the accuracy and reliability of wireless communication. Refraction is influenced by factors such as temperature, humidity, and atmospheric pressure12. References: CWNA-109 Study Guide, Chapter 2: Radio Frequency Fundamentals, page 72; CWNA-109Study Guide, Chapter 2: Radio Frequency Fundamentals, page 67.

Sensors should be deployed in critical areas where WLAN performance must be high for best results when using a WLAN monitoring solution that utilizes distributed sensor devices. A WLAN monitoring solution is a system that collects, analyzes, and reports on the status and performance of a WLAN. A WLAN monitoring solution can use different methods to gather data from the WLAN, such as embedded software agents, external hardware probes, or distributed sensor devices. Distributed sensor devices are dedicated devices that are deployed throughout the WLAN coverage area to monitor the wireless traffic and environment. Distributed sensor devices can perform various functions, such as scanning the spectrum, capturing wireless frames, measuring signal quality, detecting rogue access points, testing connectivity, and generating alerts. Distributed sensor devices can provide more accurate and comprehensive data than other methods, but they also require more planning and deployment costs. Therefore, it is important to deploy sensors strategically in critical areas where WLAN performance must be high, such as high-density zones, high-priority applications, or high-security locations. By deploying sensors in critical areas, the WLAN monitoring solution can ensure optimal WLAN performance and reliability in those areas and identify and resolve any issues or problems that may arise. The other options are not the best places to deploy sensors for best results. Deploying sensors in switching closets is not effective because sensors need to be close to the wireless medium to monitor it properly. Deploying sensors every 5 meters and alongside each AP is not efficient because sensors may overlap or interfere with each other and cause unnecessary redundancy or complexity. Deploying sensors above the plenum oneach floor is not practical because sensors may not capture the wireless traffic and environment accurately due to attenuation or reflection from the ceiling materials or objects. References: CWNA-109 Study Guide, Chapter 14: Troubleshooting Wireless LANs, page 4831

The short guard interval is an optional feature of 802.11n and 802.11ac that reduces the time between OFDM symbols from 800 ns to 400 ns. This can increase the data rate by about 11%, but also requires more precise timing and synchronization between the transmitter and the receiver. The short guard interval is only used when both the AP and the client support it and agree to use it . References: [CWNA-109 Study Guide], Chapter 4: Radio Frequency Signal and Antenna Concepts, page 163; [CWNA-109Study Guide], Chapter 4:
Radio Frequency Signal and Antenna Concepts, page 157.

The error in administration that could be the cause of this security concern is that HTTP is in use instead of HTTPS. HTTP is an unencrypted protocol that transfers data in plain text over the network. This means that anyone who captures the traffic can see the HTML code of the Web pages used for access point management, as well as any sensitive information such as passwords or configuration settings. HTTPS is an encrypted protocol that uses SSL/TLS to secure the data transmission between the Web browser and the Web server.
HTTPS prevents anyone from snooping on or tampering with the Web traffic. Therefore, HTTPS should always be used for Web based management of wireless access points, especially in autonomous mode where there is no centralized controller to enforce security policies. References: [CWNP Certified Wireless Network Administrator Official Study Guide: ExamCWNA-109], page 431; [HTTP vs HTTPS: What's The Difference And Why Should You Care?].