Online Access Free 156-115.77 Exam Questions

What would the following command fw monitor tell you?

• A.Only traffic between 10.10.10.86 and 192.168.10.4 on port 21 or port 89
• B.Only OSPF and FTP traffic between 10.10.10.86 and 192.168.10.4
• C.Any communication between 10.10.10.86 and 192.168.10.4, or any FTP traffic, or any OSPF traffic
• D.Only accepted traffic between 10.10.10.86 and 192.168.10.4, or any accepted FTP traffic, or any accepted OSPF traffic

Which of the following is NEVER affected by incorrect OS time and date configuration?

• A.Identity Awareness Kerberos authentication
• B.SIC
• C.VPN PSK authentication
• D.VPN certificate authentication

To check what is currently set in the Firewall kernel debug input the command:

• A.fw ctl debug -x
• B.fw ctl multistate
• C.fw ctl pstat
• D.fw ctl debug

Your customer reports that the time on the standby cluster member is not correct. After failing over and making it active, the time is now correct. NTP has been configured on both machines, so it is expected that both machines be in sync with the NTP server. Upon investigating, it was found that the standby member was never able to communicate with the NTP server while it was in standby configuration. What could be the problem?

• A.NTP is not supported in active-passive mode.
• B.Traffic from the standby member was hidden behind the cluster IP address and was therefore returning to the active member.
• C.Routing prevents the standby member from performing functions such as peering with dynamic routing and obtaining NTP updates.
• D.You should be syncing your backup to the primary for time settings.

When using Geo Protections, you find there are logs for a country that you believe is incorrect. What file do you review to verify what country Geo Protections should identify the traffic as?

• A.asm.C
• B.objects.C
• C.objects_5_0.C
• D.IpToCountry.csv