Explanation
Configuring Interfaces
Configure the Security Gateway 80 interfaces in the Interfaces tab in the Security Gateway window.
To configure the interfaces:
* From the Devices window, double-click the Security Gateway 80.
The Security Gateway window opens.
* Select the Interfaces tab.
* Select Use the following settings. The interface settings open.
* Select the interface and click Edit.
The Edit window opens.
* From the IP Assignment section, configure the IP address of the interface:
* Select Static IP.
* Enter the IP address and subnet mask for the interface.
* In Security Zone, select Wireless, DMS, External, or Internal. Security zone is a type of zone, created by a bridge to easily create segments, while maintaining IP addresses and router configurations. Security zones let you choose if to enable or not the firewall between segments.

Explanation/Reference: https://sc1.checkpoint.com/documents/R76/CP_R76_IdentityAwareness_AdminGuide/62050.htm

Explanation/Reference:

Explanation/Reference:
Explanation:
The most likely reason for the logs data to stop is the low disk space on the logging device, which can be the Management Server or the Gateway Server.