Online Access Free 156-915 Exam Questions

Which of the following commands shows full synchronization status?

• A.cphastop
• B.fw hastat
• C.cphaprob -a if
• D.cphaprob -i list
• E.fw ctl pstat

How can you prevent delay-sensitive applications, such as video and voice traffic, from being dropped due to long queue using Check Point QoS solution?

• A.Weighted Fair queuing
• B.guaranteed per connection
• C.Low latency class
• D.guaranteed per VOIP rule
• E.DiffServ rule

How can you reset Secure Internal Communications (SIC) between a SmartCenter Server and Security Gateway?

• A.From cpconfig on the SmartCenter Server, choose the Secure Internal Communication option and retype the activation key.Next, retype the same key in the gateway object in SmartDashboard and reinitialize Secure Internal Communications (SIC).
• B.From the SmartCenter Server's command line type fw putkey -p <shared key> <IP Address of SmartCenter Server>.
• C.Run the command fwm sic_reset to reinitialize the Internal Certificate Authority (ICA) of the SmartCenter Server. Then retype the activation key on the Security Gateway from SmartDashboard.
• D.From the SmartCenter Server's command line type fw putkey -p <shared key> <IP Address of Security Gateway>.
• E.Use SmartUpdate to retype the activation key of the Security Gateway.

A cluster contains two members, with external interfaces 172.28.108.1 and 172.28.108.2.
The internal interfaces are 10.4.8.1 and 10.4.8.2. The external cluster's IP address is
172.28.108.3, and the internal cluster's IP address is 10.4.8.3. The synchronization interfaces are 192.168.1.1 and 192.168.1.2. The Security Administrator discovers State Sychronization is not working properly.cphaprob -a if command output displays as follows:

What is causing the State Synchronization problem?

• A.Interfaces 192.168.1.1 and 192.168.1.2 have defined 192.168.1.3 as a sub-interface.
• B.The synchronization network has a cluster, with IP address 192.168.1.3 defined in the gateway-cluster object. Remove the 192.168.1.3 VIP interface from the cluster topology.
• C.The synchronization interface on the cluster member object's Topology tab is enabled with "Cluster Interface". Disable this interface.
• D.Another cluster is using 192.168.1.3 as one of the unprotected interfaces.

The following is cphaprob state command output from a New Mode High Availability cluster member:
Which machine has the highest priority?

• A.192.168.1.1, because its number is 1
• B.192.168.1.2, because its state is active.
• C.192.168.1.2, since its number is 2
• D.This output does not indicate which machine has the highest priority.