Online Access Free 300-360 Exam Questions

you have a customer that is building a new campus of four 3 story buildings that you have just completed that site survey for. the customer is interested in the amount of rack space they will need to allocate in either the building MDF or in the data center of controllers. Each building is going to require 75 APs to support voice and data. How should the controllers be deployed to provide the least number of controllers. the highest redundancy and the easiest management?

• A.Use the centralized deployment method in the data center with the N+ 1 redundancy method.
• B.Use the distributed deployment method in each building MDF with the N+ N redundancy method.
• C.Use the distributed deployment method in each building MDF with the N+N+ 1 redundancy method and Client SSO.
• D.Use the centralized deployment method in the data center with the 1 :1 redundancy method and client SSO

A post-deployment active wireless site survey was just completed for a company. Which two pieces of information must be included in the site survey report?(choose two)

• A.Client performance metrics obtained during the survey
• B.Heat maps from the data that was captured
• C.RRM recommendations for the WLC
• D.Floor plans for cisco prime infrastructure
• E.Existing WLC configurations

A wireless engineer is doing a pre-site survey. Which two attributes must match between the site survey and the production clients? (Choose two.)

• A.radio frequency
• B.mobility patterns
• C.exact location
• D.user
• E.AP type

Which purposeof using metageek chanalyzer during site survey is true?

• A.To verify the antenna pattern of the Aps
• B.To verify the different channels used duringthe design of Wi-Fi networks
• C.To determine the sources of non-802.11 interferences
• D.To show only the usage of the2.4 GHz spectrum

A network engineer is planning OoS in a wireless infrastructure. Which two QoS attributes should the engineer keep in mind? (Choose two)

• A.QoS is only truly working when it is configured in the network end-to-end.
• B.QoS DSCP is changed at the AP switch before possing to the WLC
• C.QoS in a WLC automatically creates priority for wireless voice
• D.QoS is possible only for Wi-Fi phones on the WLC
• E.QoS needs to be tagged near the source and applied on the outbound throughout the network