Online Access Free Cisco.300-410.v2021-10-09.q161 Practice Test (Page 32)

300-410 Exam Question 151

Refer to the exhibit.

An IP SLA is configured to use the backup default route when the primary is down, but it is not working as desired. Which command fixes the issue?

A.R1(config)# ip route 0.0.0.0.0.0.0.0.2.2.2.2 10 track 1

B.R1(config)#ip sla track 1

C.R1(config)# ip route 0.0.0.0.0.0.0.0.2.2.2.2

D.R1(config)# ip route 0.0.0.0.0.0.0.0.1.1.1.1 track 1

300-410 Exam Question 152

Refer to the exhibit.

Which two actions restrict access to router R1 by SSH? (Choose two.)

A.Configure transport output ssh on line vty and remove sequence 10 from access list 199.

B.Remove sequence 10 from access list 100 and add sequence 20 deny tcp any any eq telnet to access list 199

C.Remove class-map ANY from service-policy CoPP

D.Configure transport output ssh on line vty and remove sequence 20 from access list 100.

E.Configure transport input ssh on line vty and remove sequence 30 from access list 100.

300-410 Exam Question 153

Refer to the exhibit.

The Math and Science departments connect through the corporate IT router but users in the Math department must not be able to reach the Science department and vice versa Which configuration accomplishes this task?

A.vrf definition Science
address-family ipv4
!
interface E 0/2
vrf forwarding Science
ip address 192.168.1.1 255.255.255.0
no shut
!
interface E 0/3
vrf forwarding Science
ip address 192.168.2.1

B.vrf definition Science
address-family ipv4
!
interface E 0/2
ip address 192.168.1.1 255.255.255.0
vrf forwarding Science
no shut
!
interface E 0/3
ip address 192.168.2.1 255.255.255.0
vrf forwarding Science
no shut

C.vrf definition Science
address-family ipv4
!
interface E 0/2
ip address 192.168.1.1 255.255.255.0
no shut
!
interface E 0/3
ip address 192.168.2.1 255.255.255.0
no shut

D.vrf definition Science
!
interface E 0/2
ip address 192.168.1.1 255.255.255.0
no shut
!
interface E 0/3
ip address 192.168.2.1 255.255.255.0
no shut

300-410 Exam Question 154

Drag and drop the packet types from the left onto the correct descriptions on the right.

Correct Answer:

Explanation

Unlike legacy network technologies such as ISDN, Frame Relay, and ATM that defined separate data and control channels, IP carries all packets within a single pipe. Thus, IP network devices such as routers and switches must be able to distinguish between data plane, control plane, and management plane packets to treat each packet appropriately.From an IP traffic plane perspective, packets may be divided into four distinct, logical groups:1. Data plane packets - End-station, user-generated packets that are always forwarded by network devices to other end-station devices. From the perspective of the network device, data plane packets always have a transit destination IP address and can be handled by normal, destination IP address-based forwarding processes.2. Control plane packets - Network device generated or received packets that are used for the creation and operation of the network itself. From the perspective of the network device, control plane packets always have a receive destination IP address and are handled by the CPU in the network device route processor. Examples include protocols such as ARP, BGP, OSPF, and other protocols that glue the network together.3. Management plane packets - Network device generated or received packets, or management station generated or received packets that are used to manage the network. From the perspective of the network device, management plane packets always have a receive destination IP address and are handled by the CPU in the network device route processor. Examples include protocols such as Telnet, Secure Shell (SSH), TFTP, SNMP, FTP, NTP, and other protocols used to manage the device and/or network.4. Services plane packets - A special case of data plane packets, services plane packets are also user-generated packets that are also forwarded by network devices to other end-station devices, but that require high-touch handling by the network device (above and beyond normal, destination IP address-based forwarding) to forward the packet. Examples of high-touch handling include such functions as GRE encapsulation, QoS, MPLS VPNs, and SSL/IPsec encryption/decryption, etc. From the perspective of the network device, services plane packets may have a transit destination IP address, or may have a receive destination IP address (for example, in the case of a VPN tunnel endpoint).

300-410 Exam Question 155

What is a prerequisite for configuring BFD?

A.Jumbo frame support must be configured on the router that is using BFD.

B.All routers in the path between two BFD endpoints must have BFD enabled.

C.Cisco Express Forwarding must be enabled on all participating BFD endpoints.

D.To use BFD with BGP, the timers 3 9 command must first be configured in the BGP routing process.

Other Version: 1156Cisco.300-410.v2026-02-04.q370; 1946Cisco.300-410.v2024-01-03.q227; 2133Cisco.300-410.v2023-02-14.q151; 4404Cisco.300-410.v2022-08-13.q115; 2750Cisco.300-410.v2022-08-11.q99; 3202Cisco.300-410.v2022-07-18.q102; 4929Cisco.300-410.v2022-07-02.q117; 2420Cisco.300-410.v2022-06-24.q106; 66Cisco.Real4prep.300-410.v2022-06-08.by.lisa.285q.pdf; 7023Cisco.300-410.v2022-02-25.q285; 91Cisco.Itpass4sure.300-410.v2021-09-03.by.afra.234q.pdf

Latest Upload: 106F5.F5CAB5.v2026-06-22.q29; 112Juniper.JN0-650.v2026-06-22.q31; 126Salesforce.Plat-Admn-201.v2026-06-22.q72; 152VMware.3V0-21.25.v2026-06-20.q29; 149Microsoft.AB-731.v2026-06-19.q23; 289IIA.IIA-CIA-Part2.v2026-06-19.q308; 170DAMA.MD-1220.v2026-06-19.q66; 175ISTQB.CT-AI.v2026-06-18.q68; 316IIA.IIA-CIA-Part3.v2026-06-17.q220; 216WGU.Introduction-to-IT.v2026-06-17.q67

300-410 Exam Question 151

300-410 Exam Question 152

300-410 Exam Question 153

300-410 Exam Question 154

300-410 Exam Question 155

Download PDF File