A.A Cisco ACI leaf flushes all local endpoints in the received EPG when an MSTP TCN frame is received.

B.A dedicated EPG must be created for the native VLAN ID with static bindings toward the MSTP- enabled switches.

C.A static path binding is required for native VLAN to carry the MST BPDUs in existing EPGs.

D.Mis-cabling protocol is used to snoop the MSTP TCN packets.

E.The PVST simulation must be configured on external network switches to support MSTP.

A.Configure BIDIR-PIM in the IPN and ISN

B.Connect all spines to the IPN and ISN

C.Use dedicated uplinks on Site 1 spines for ISN connections

D.Filter the advertisement of the Site 2 TEP pool into the IPN

A.Configure OSPF virtual links

B.Modify L3Out 1 to use the same OSPF area as L3Out 2

C.Deploy both areas under the same L3Out policy

D.Change one of the areas to area 0

A.network-centric

B.edge-core-edge model

C.application-centric

D.traditional VLAN/subnet model

A.Enable endpoint loop protection.

B.Disable enforce subnet check.

C.Enable rogue endpoint control.

D.Disable IP bridge domain enforcement.