Option B is the correct configuration that implements the traffic capture that meets the requirements. The configuration sets the flow timeout to 30 seconds, which matches the destination flow analyzer's limit. The configuration also enables MAC packet classification and layer 2-switched flow monitoring on the interface ethernet 1/1, which belongs to VLAN 10. This allows the switch to capture the traffic from VLAN 10 and send it to the flow analyzer for troubleshooting. References:
* Cisco Nexus 9000 Series NX-OS System Management Configuration Guide, Release 9.3(x) - Configuring NetFlow [Cisco Nexus 9000 Series Switches], Configuring NetFlow, Configuring NetFlow
* Cisco Nexus 9000 Series NX-OS System Management Configuration Guide, Release 9.3(x) -
* Configuring NetFlow [Cisco Nexus 9000 Series Switches], Configuring NetFlow, Configuring Layer
2-Switched NetFlow

Explanation

https://www.cisco.com/c/en/us/td/docs/hyperconverged_systems/HyperFlex_HX_DataPlatformSoftware/ Installation_VMWare_ESXi/3_5/b_HyperFlexSystems_Installation_Guide_for_VMware_ESXi_3_5/ b_HyperFlexSystems_Installation_Guide_for_VMware_ESXi_3_5_chapter_01100.html#:~:text=Overview%
20of%20HyperFlex%20Hardware%20Acceleration%20Cards,-This%20chapter%20provides&text=These%
20cards%20provide%20improved%20performance%20and%20compression%20efficiency%20for%20most
%20storage%20workloads.

The Cisco Integrated Management Controller (IMC) is a system management component built into Cisco UCS C-Series servers. When the IMC is upgraded, it disrupts the Keyboard, Video, Mouse (KVM) sessions that are used for remote server management. This is because the IMC upgrade process requires a reboot of the controller, which temporarily disconnects any active KVM sessions. However, it does not affect Cisco UCS Manager, SAN traffic, or data traffic, as these components operate independently of the IMC.
References: Implementing and Operating Cisco Data Center Core Technologies (DCCOR) course materials and the Cisco Data Center Core Technologies source book.