Online Access Free 500-220 Exam Questions

Which design requirement is met by implementing syslog versus SNMP?

• A.when proactive alerts for critical events must be generated
• B.when information such as flows and client connectivity must be gathered
• C.when automation capabilities are needed
• D.when organization-wide information must be collected

Refer to the exhibit.

What are the Loss and Average Latency statistics based on?

• A.responses that the MX appliance receives on the connectivity-testing IP addresses on the Help > Firewall info page
• B.responses that the MX appliance receives on the connectivity-testing IP address that is configured on the Security & SD-WAN > SD-WAN & Traffic Shaping page
• C.responses that the MX appliance receives on the connectivity-testing IP addresses on the Security & SD- WAN > Firewall page
• D.responses that the MX appliance receives on the connectivity-testing hostnames on the Insight > Web App Health page

What is a feature of distributed Layer 3 roaming?

• A.All wireless client traffic is tunneled.
• B.An MX Security Appliance is required as a concentrator.
• C.All wireless client traffic can be split-tunneled.
• D.An MX Security Appliance is not required as a concentrator.

Refer to the exhibit.

Why does the end user complain of poor wireless performance?

• A.Non-802.11 traffic of 18 percent indicates poor AP placement.
• B.Channel 48 utilization is at 84 percent.
• C.The client is connected to the secondary radio of the AP instead of the primary radio
• D.The client is using a 20 MHz channel width to connect.

The WAN connection of a Cisco Meraki MX security appliance is congested, and the MX appliance is buffering the traffic from LAN ports going to the WAN ports. High, normal, and low priority queue buffers are all full. Which proportion of the normal traffic is forwarded compared to the other queues?

• A.2/10 packets
• B.2/7 packets
• C.5/15 packets
• D.4/10 packets