Online Access Free 640-893 Exam Questions

Rafter retaliation or replacement of a Cisco UCS C-Series Rack-Mount Server, the host does not boot, which four options should be verified? (Choose four)

• A.Check for loose HDD cables
• B.Reseat or replace the DIMMs
• C.Verify that the front I/O dongle is seated correctly.
• D.Reseat the mezzanine card connector
• E.Check the CPU sockets for bent pins
• F.Check the Cisco IMC for fan faults
• G.Verify that the host power rails are good and power signals are OK

Which command-line interface mode is best described by this prompt?
UCS-switch-A (nxos)#

• A.EXEC mode
• B.global configuration mode
• C.maintenance mode
• D.Cisco IOS mode
• E.local management mode

What is the correct path to verify the Overall Status of Chassis 1 Server 3?

• A.Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 FSM tab
• B.Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 Status tab
• C.Status Tab > Chassis > Chassis 1 > Servers > Server 3
• D.Servers Tab > Chassis > Server 3 General
• E.Admin Tab > Chassis > Chassis 1 > Servers > Server 3 Genera, tab
• F.Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 General tab

From the Cisco NX-OS prompt"UCS-switch (nxos) #, which command displays the Cisco NX-OS configuration that is currently in use?

• A.show configuration
• B.show running-config
• C.show mem-config
• D.show boot-config
• E.show startup-config

Which two statements about DIMM replacement in Cisco UCS Servers are true? (Choose two.)

• A.Rack-mount and blade servers have memory fault LEDs that indicate which DIMM requires attention
• B.If the memory in a server is not fully populated, you can install DIMMs in any open slot
• C.In servers that require pairs of DIMMs, the pairs must be identical (manufacturer, size, part#, and so on)
• D.In blade servers, DIMMs can be installed in 1, 2, 4, or 8 DIMMs per channel.