Online Access Free 1Y0-A28 Exam Questions

Scenario: An engineer implementing a NetScaler is tasked with creating a new VLAN, named VLAN 2, and added to the current interfaces. A new IP address of
10.102.29.54 with a network mask of 255.255.255.0 must be configured for VLAN 2. Which commands could the engineer use to achieve this configuration in the command-line interface prior to binding VLAN 2?

• A.add ns ip 10.102.29.54 255.255.255.0 add vlan 2
• B.add ns ip 10.102.29.54 255.255.255.0 -vrID 2
• C.add ns ip 10.102.29.54 255.255.255.0 -type SNIP set ns ip 10.102.29.54 255.255.255.0 -vrID 2
• D.set vlan 2 -aliasName VLAN2 add ns ip 10.102.29.54 255.255.255.0

Scenario: An application that uses HTTP for connections and other protocols for different types of content has been deployed. Load balancing virtual servers have been created for each protocol and the engineer now needs to ensure that once a load balancing decision has occurred, further requests for different content are served from the same server. How could the engineer achieve this?

• A.Create a persistency group.
• B.Set each virtual server to use Source IP Hash as the load balancing method.
• C.Set the Spillover method to DYNAMICCONNECTION.
• D.Add a new virtual server for each protocol that is not directly addressable.

Some SSL certificate files may be missing from a NetScaler appliance.
Which directory should an engineer check to determine which files are missing?

• A./nsconfig/ssl
• B./nsconfig/ssh
• C.flash/nsconfig/
• D./var/netscaler/ssl/

How could an engineer configure a monitor to ensure that a server is marked as DOWN if the monitor test is successful?

• A.Disable the Health monitoring option for the service group
• B.Enable the LRTM option for the monitor
• C.Enable the Reverse option for the monitor
• D.Disable Down state flush for the service group

Scenario: A network engineer adds a secondary node for high availability (HA) purposes. To confirm the implementation is working, the engineer initiates a fail over;
however when this is complete, some virtual servers are un-reachable. What is a possible cause of this issue?

• A.HA sync does not propagate network settings by default.
• B.The network configuration is mismatched on the nodes.
• C.The nsroot password has been changed on the new node.
• D.SSL has not been enabled as a feature.