A defective battery is the most likely cause of a mobile phone that gets really hot to the touch, does not retain a charge, and is slow while charging. A defective battery can cause the phone to overheat and may also cause performance issues. References: CompTIA A+ Certification Exam Objectives 1001, 2.14

MDM (Mobile Device Management) is a policy that allows the technician to remotely manage, secure, and monitor the personal devices that employees use for work purposes. MDM can enforce security settings, such as passwords, encryption, and antivirus software, on the personal devices. MDM can also remotely wipe or lock the devices in case of loss, theft, or termination of employment. MDM can protect company information by preventing unauthorized access, data leakage, or malware infection on the personal devices.
References
What is Mobile Device Management (MDM)?
Chapter 2: Networking

The projector is overheating and needs to be cleaned. A common cause of projector shutdown is overheating, which can be triggered by dust accumulation, blocked vents, or faulty fans. The projector has a thermal protection circuit that turns it off when the temperature reaches a certain level, and it will not turn back on until it cools down. To prevent this issue, the projector needs to be cleaned regularly and placed in a well-ventilated area. The video cable, the bulb, and the outlet are not likely to cause the projector to turn off intermittently.
Reference: [CompTIA A+ Core 1 (220-1101) Certification Study Guide], page 18.

The digitizer is a crucial component of a touchscreen device, responsible for translating touch actions into digital signals that the device can interpret. If a hard reset does not resolve the touchscreen's unresponsiveness, it's likely that the digitizer is damaged. Physical damage, such as cracks or heavy impacts, can impair the digitizer's ability to function correctly, leading to an unresponsive touchscreen. This type of hardware issue requires professional repair or replacement of the touchscreen assembly to restore functionality.References:
Mobile Devices 1101.docx, "Touchscreen Technology" section.

The correct answer is C. Cat 6.
An RJ45 connector is a standard type of physical connector for network cables. RJ45 connectors are used almost exclusively with Ethernet cables and networking1. Ethernet cables are twisted pair cables that carry data signals between devices on a network, such as computers, routers, switches, and servers2.
There are different categories of Ethernet cables, such as Cat 5, Cat 5e, Cat 6, and Cat 7, that have different specifications and performance levels. Cat 6 is one of the most common types of Ethernet cables, which supports data transfer speeds up to 10 Gbps and bandwidth up to 250 MHz3. Cat 6 cables have four pairs of copper wires, each with a plastic insulation and a foil or braided shield. The wires are twisted together to reduce crosstalk and interference4.
To terminate a Cat 6 cable, an administrator needs to use an RJ45 connector that matches the wiring scheme of the cable. There are two common wiring schemes for Ethernet cables: T568A and T568B. The administrator needs to strip the cable jacket, untwist the wires, arrange them in the correct order according to the chosen scheme, trim the excess wire, and insert them into the RJ45 connector. Then, the administrator needs to use a crimping tool to secure the wires and the connector4.
Optical cables are not terminated with RJ45 connectors, but with different types of connectors that can transmit light signals, such as SC, ST, LC, or MTRJ connectors. Optical cables are used for fiber-optic networks that can carry data over long distances at high speeds.
Serial cables are not terminated with RJ45 connectors, but with different types of connectors that can transmit serial data signals, such as DB9, DB25, or DE9 connectors. Serial cables are used for connecting devices that use serial communication protocols, such as modems, printers, scanners, or keyboards.
USB cables are not terminated with RJ45 connectors, but with different types of connectors that can transmit universal serial bus data signals, such as USB-A, USB-B, USB-C, or Micro-USB connectors. USB cables are used for connecting devices that use USB communication protocols, such as flash drives, cameras, mice, or chargers.