Online Access Free ISS-003 Exam Questions

Which of the following memory modules can be used in the Intel@ Server Board S1200V3RP? Please choose your answer from the list below.

• A.Non-ECC UDIMM
• B.ECC RDIMM
• C.ECC UDIMM
• D.ECC LRDIMM
• E.Non ECC LRDIMM
• F.Non-ECC RDIMM

Your customer calls you to say that their main server is having problems and no one can do any work at the present. You will have to help troubleshoot over the phone since you wereunable to convince your customer to invest in a remote management module at the time of purchase. Which of the following should you do first?

• A.Swap out all the components one by one with known good ones ensuring appropriate ESD precautions are observed.
• B.Get a complete problem statement and full system logs.
• C.Swap out all the memory since this is obviously memory related.
• D.Install new hard drives as this is usually the first problem in a hard-working server.

Your customer calls with an error message they noticed while making some changes in the BIOS setup screen; stating that the "SEL is full." What does this mean and how would you advise your customer to correct this error from the list below?

• A.They should enable the option "Clear the SPI flash memory."
• B.They should install an additional flash drive for the SEL
• C.They should enable the option "Clear SEL" in BIOS
• D.They should clear the SEL using SELclear utility
• E.They should clearthe SEL using SELViewer

Your customer has asked you - the Intel@ Server Specialist- for confirmation onthe process following changes to their server (additional memory, a different raid card and a 40Gb Ethernet card)? What must they do to ensure accurate monitoring of all the sensors in their S2600WT based server?

• A.They don't need to do anything - the current firmware will auto-configure.
• B.Only the SDR needs to be updated as the FRU auto-configures.
• C.Only the FRUneeds to be updated as the SDR now auto-configures
• D.The ME must be updated prior to use of the master.cfg and then the FRUSDR update may be carried out.
• E.The FRU/SDR must be updated with the latest master.cfg to enable the new hardware to be detected.

Your customer has a dual socket server board; and they have complained to you that their customer is constantly getting PCIe errors. At yourrequest they send you the System Event log. On investigation of the SEL by you, you discover some events that look like the following: TimeStamp:03/05/2014 12:18:41 SensorName:PCIe Cor Sensor. Bus:0, device:3, function:2
Which one of the following represents the correct order in which troubleshooting should occur?

• A.Rerun the FRU/SDR to force the system to detect the correct PCIe generation for this device.
• B.If the error happens regularly, try to cross-test PCIe devices to see if the error follows the card or stays with the slot.
• C.A, B, E
• D.B, C, F
• E.A, F, E
• F.Check SEL troubleshooting guide in order to understand PCIe bus, device, function of the card that generates the error. Then check TPS to identify the slot to find the suspect component.
• G.If error happens very rarely, disable AER reporting in BIOS
• H.A, D, C
• I.List through the error codes from the User guide to find the translation table for the SEL in order to identify the failing device and link speed.
• J.Force slower PCIe link speeds in the BIOS setup utility.