While attempting to add a new computer to the company network the network technician is unable to connect automatically. The technician runs a command and is presented with the following output:

The technician assigns a static IP address and is able to connect to the network. Which of the following BEST describes the cause of the issue?

A network administrator wishes to ensure there are no unnecessary open communication paths into a
server. Using a port scanner, the administrator finds that ports are reported as closed. Which of the
following BEST explains this response?

A network technician does not have access to the GUI of a server and needs to adjust some network properties.
Given the command:

Which of the following is the technician attempting to alter?

Multiple users are reporting that they are unable to access the network. The ENTIRE network is shown in the diagram. PCs are not statically assigned IP addresses. The following devices will display settings:
* WorkstationA
* WorkstationB
* WorkstationC
* WorkstationD
* WorkstationE
* WorkstationF
* WorkstationG
* Laptop1
* Laptop2
* DHCP server1
* DHCP server2
Review the settings and select the box in the diagram that identifies the device causing the issue.
Only one device can be selected at a time.
After checking the device that is causing the issue, select the second tab in the lower left hand corner. Identify the reason as to why some users are unable to access the network.
Instructions:
When the simulation is complete, select the Done button to submit.
Part 1












Part 2
Identify the reason as to why some users are unable to access the network.

Corporate headquarters provided your office a portion of their class B subnet to use at a new office location.
Range Given: 172.30.232.0/24
* Sales 57 devices
* HR 23 devices
* IT 12 devices
* Finance 32 devices
* Marketing 9 devices
INSTRUCTIONS
Allocate the minimum number of addresses (using CIDR notation) needed to accommodate each department.
After accommodating each department, identify the unused portion of the subnet by responding to the question on the graphic.
All drop downs must be filled.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.