Explanation
The workstation was configured with a static IP that is the same as the server is the most likely cause of the issue where users are unable to access any network resources. A static IP address is an IP address that is manually assigned to a device and does not change over time. A static IP address can be useful for devices that need to be easily identified or accessed on a network, such as servers or printers. However, if two devices on the same network have the same static IP address, it can cause an IP address conflict. An IP address conflict occurs when two devices try to use the same IP address at the same time, resulting in network communication errors or failures. An IP address conflict can prevent users from accessing any network resources that rely on the IP address for identification or routing. References: [CompTIA Network+ Certification Exam Objectives], What Is an IP Address Conflict? | HowStuffWorks

Stratum 1 devices are the most accurate ntp time sources accessible via a network connection. A Stratum 1 device would normally be synchronised via a Stratum 0 reference clock.

Explanation
If the link LEDs on the workstation and modem do not light up when connecting to a workstation, it could indicate a problem with the cable connecting them. The cable could be damaged, defective, or incompatible with the devices. A technician should replace the cable with a known good one and check if the link LEDs light up. If not, the problem could be with the network interface cards (NICs) on the workstation or modem.
References: https://www.comptia.org/blog/what-is-link-light