Online Access Free DSDSC-200 Exam Questions

A site has multiple storage administrators. Some administrators need to be limited to manage only specific volumes. The administrator should be able to create and present volumes within the administrator's area. Those administrators should NOT be able to see any other volumes created in the Storage Center.
How should the deployment engineer accomplish tins task?

• A.Grant the administrator Admin user access. Create server folders and move the desired volumes into them then assign the server folder to the desired administrator.
• B.Grant the administrator Volume Manager access. Create server folders and move the desired volumes into them, then assign the server folder to the desired administrator.
• C.Grant the administrator Admin user access. Create volume folders and move the desired volumes into them, then assign the volume folder to the desired administrator.
• D.Grant the administrator Volume Manager access. Create volume folders and move the desired volumes into them, then assign the volume folder to the desired administrator.

Which two steps should the engineer take prior to racking any equipment? (Choose two.)

• A.remove any jewelry ormetal objects from the engineer's body
• B.remove the disk drives from inside the shipped enclosures
• C.remove batteries from controllers to prevent risk of electric shock
• D.apply an ESD wrist or ankle strap to avoid damage to parts

What should be selected on the IO card change wizard during an upgrade if the slot/port combination is no longer used?

• A.IO card changed
• B.Configure new zone
• C.IO card has been removed
• D.Configure IO card

A zone must include at least one target and at least one initiator.
How many targets and initiators should each zone include according to recommended best practice?

• A.multiple initiator; multiple target
• B.single initiator; multiple target
• C.single initiator; single target
• D.multiple initiator; single target

A engineer needs to use the Storage Center setup wizard to complete the local port configuration. The engineer needs to select a value for 'Purpose' for SAS/FC ports that are directly connected between the two system controllers. Which value should the engineer select?

• A.reserved
• B.unknown
• C.back end
• D.direct connect