Online Access Free DES-1221 Exam Questions

What is the correct power up sequence for a PowerStore?

• A.1. Base Enclosure Node A, 2. Base Enclosure Node B, 3. Expansion Enclosure
• B.1. Expansion Enclosure, 2. Base Enclosure
• C.1. Base Enclosure Node B, 2. Base Enclosure Node A, 3. Expansion Enclosure
• D.1. Base Enclosure, 2. Expansion Enclosure

A PowerStore X system is being implemented using Dell EMC S5248F-ON Ethernet switching as data switches.
What is required when configuring the VLT interconnects on the data switches?

• A.Configure the VLT MACs with a matching unique made-up address
• B.Assign the switch default route for the VLT traffic
• C.Set the VLT connection to the switch default VLAN
• D.On each switch, select the switch management port MAC as the VLT MAC

Refer to the Exhibit.

Note the yellow arrow. A Data Center Engineer notices that the LED is blinking blue and amber alternating at one second intervals. What does this indicate?

• A.Node in Service Mode
• B.System is booting
• C.System not initialized
• D.Node is Degraded

A customer wants to add capacity to their PowerStore 5000T. The system is populated with 6 NVMe SCM
750 GB drives. What is the maximum number and type of drives that can be added to the base enclosure?

• A.17 NVMe SSD
• B.15 NVMe SCM
• C.17 NVMe SCM
• D.15 NVMe SSD

How is the upgrade process on a multi-appliance cluster run?

• A.On one node at a time
• B.Master appliance primary node first, then the peer node
• C.On all primary nodes first, then peer nodes
• D.In parallel on all nodes