A.FortiSwitch would need to be rebooted.

B.The split port can be assigned to a native VLAN.

C.The Dort full speed prior to the split was 100G QSFP+.

D.The FortiSwitch model is equipped with a maximum of 54 interfaces

A.MSTP uses port role election, similar to rapid STP on the instances.

B.MSTP uses root bridge selection, similar to rapid STP

C.MSTP uses alternate path and primary path, similar to regular STP.

D.MSTP uses timers for transitioning the ports, similar to regular STP.

A.Assign an IP address and subnet mask to FortiSwitch VLANs

B.Assign untagged VLANs using FortiGate CLI

C.Configure a native VLAN on the FortiLink

D.Only assign one native VLAN on a port

A.Just the port egress payloads are printed on CLI.

B.The switch port might be used as a trunk member

C.Only untagged VLAN traffic can be captured.

D.The types of packets captured is limited.

A.FortiLink authorization sets the FortiSwitch management mode to FortiLink.

B.The administrator must manually pre-authorize FortiGate on FortiSwitch by adding the FortiGate serial number.

C.FortiSwitch requires a reboot to complete the authorization process.

D.A FortiLink frame is sent by FortiGate to FortiSwitch to complete the authorization.