Online Access Free GB0-180 Exam Questions

Input "display rip" command on Quidway router, the echoes are shown as follows:
[Quidway]display rip
RIP is turning on
checkzero is on default-cost : 16
no peer
network all
summary is on preference : 100
Which of the following statement is true?

• A.no peer displays that this router is not directly connected to any other router
• B.By default, RIP route protocol priority is 100, but RIP priority can be changed via
  "priority" command
• C.This command displays current running status and configuration information of RIP
• D.This command shows that all interfaces of the router use RIP protocol, and the maximal reachable hop count is 16

Concerning Gigabits Ethernet, which of the following is true( )

• A.IEEE802.3ab defines Gigabits Ethernet
• B.IEEE 802.3z specially defines the transmission standard for Gigabits Ethernet over twisted pair
• C.Gigabits Ethernet supports network rate self-adaptation, and can automatically negotiate transmission rate with fast Ethernet
• D.Within one collision domain, Gigabits Ethernet does not allow interconnection by the repeaters

On Quidway series routers, the direct connected route in the routing table possibly comes from:

• A.The route of network segment where the interfaces of the router
• B.The host route of the interface of the opposite router directly connected to the said router
• C.Default route
• D.The host route of the own interfaces of the router

In the Frame Relay network, the Frame Relay monitors the status of PVC through ( ) protocol

• A.BECN
• B.FECN
• C.LMI
• D.DLCI

Routing loop problem will give rise to( )

• A.Inconsistent route
• B.Waste of line bandwidth
• C.Router restart
• D.Slow convergence