Online Access Free HP0-S39 Exam Questions

An HP BladeSystern c7000 enclosure with Virtual Connect Fibre Channel modules is located in a data center named DC1. The server blades use Fibre Channel over Ethernet (FCoE) to communicate with the storage systems. Another HP BladeSystern c7000 enclosure is located in a data center named DC2 Data in DC1 needs to replicate the data on a server blade in DC2.
How should the replication occur?

• A.TheFCoE traffic should be routed to DC2
• B.A dedicated VLAN should be created between the data centers
• C.DC1 should be configured to connect directly to DC2
• D.TheFCoE traffic should be encapsulated to IP before it is transferred between the data centers

HOTSPOT
Match the Cisco networking terms with their corresponding HP networking terms.

Correct Answer:

Explanation:
Port Channel - Link aggregation group Access port - Untagged port Trunk port - Tagged port

A customer has an HP BladeSystem c7000 enclosure with one Virtual Connect FlexFabric module with shared uplink sets (SUSs). After adding 200 VLANs to a server profile, the customer cannot save the server profile.
What should the customer do to be able to save the profile?

• A.Add the VLANs to the appropriate SUS.
• B.Reduce the number of SUSs in the domain
• C.Add the appropriate SUS to the server profile.
• D.Reduce the number of VLAIMs in the server profile

What is an advantage of using distributed virtual switches instead of standard virtual switches with hypervisors?

• A.They simplify provisioning of additional networks to hypervisors.
• B.They allow virtual machines to communicate with other machines.
• C.They allow the host to communicate with external networks.
• D.They are linked directly to physical NICs.

A customer has an HP BladeSystem c7000 enclosure with Virtual Connect FlexFabric modules and two HP 5920 switches. Two cables are connected from each Virtual Connect module to each HP 5920 switch.
What should the customer do to create a link aggregation group using the connected cables?

• A.Add the uplink ports to a server profile.
• B.Add the uplink ports to a SAN fabric.
• C.Cross-connect the uplink points between Virtual Connect modules.
• D.Add the uplink ports to a shared uplink set.