Online Access Free HP0-Y45 Exam Questions

A hospital CIO tells the network architect that the current network solution is not performing well.
The hospital has access layer that supports 48 10/100/1000 Mbps ports and one Gigabit uplink. The hospital is seeking an upgrade to provide better performance and redundancy. The CIO cannot provide the network architect more detailed information about traffic patterns and utilization
but does not want the network architect to install Intelligent Management Center (IMC) and analyze the network.
The CIO does indicate that these applications are important:
-Voice over IP(VoIP) -Scheduling and buildingapplications -Patient data logging -Medical imaging
The network architect needs to plan appropriate oversubscription ration for access layer uplinks.
What is one piece of information that the architect should collect for this task?

• A.How much bandwidth the medical imaging applications require.
• B.Which 802.1p value the VoIP applications use to mark their traffic
• C.Whether the billing applications and patient data require encryption.
• D.Whether the VoIP traffic must be forwarded at Layer 2 or whether it can be routed.

Refer to the exhibit.

Employees connect on wired connections, which are secured with 802.1X. Employees can also connect to a WLAN that enforces Wi-Fi Protocol Access 2 (WPA2) and 802.1X authentication. The customer wants users to be assigned to different VLANs based on their Active Directory user groups.
Each of the 14 users groups includes between 100 and 200 users. The customer expects only several hundred concurrent wireless users, who might move around the site.
How can the architect make this design seamless roaming between access points (APs) connected in different locations?

• A.Enable preauthentication for the Employees WLAN. Also enable this feature on the Wireless clients and on the RADIUS server that authentication users.
• B.Add VLAN 2-16 to the core switch with new subnet addresses. Have APs tunnel all user traffic to the controller (using mobility traffic manager[MTM]
• C.Disable WPA2 and 802.1X on the employees WLAN. Configure the controller's IPSec Virtual Private Network (VPN) capabilities for the WLAN instead.
• D.Make sure that the RADIUS server assigns a user to the same VLAN regardless of whether the user has connected on an Ethernet port or to the WLAN.

A physical server has 6 NICs and supports eight virtual machines (VMs). NIC 1 and NIC 2 connect
the VMs to the data Center LAN. The two NICs are intended to provide load balancing and redundancy (the other NICs are used for purposes not relevant to this question) VMs 1 through 5 belong to VLAN 10. VMs 6 through 8 belong to VLAN 20.
What is a proper way to set up the switch or virtual switches?

• A.Virtual switch 1 supports VLAN 10 and VLAN 20, maps to NIC 1 and NIC 2, and supports all VMs.
• B.Virtual switch 1 supports VLAN 10, maps to NIC 1 and NIC 2, and maps to virtual NICs on VMs
  1 through 5.
  Virtual switch 2 supports VLAN 20, maps to NIC 1 and NIC2, and amps to virtual NICs on VMs 6
  through 6.
• C.Virtual switch 1 supports VLAN 10, maps to NIC 1, and maps to virtual NICs on all VMs.
  Virtual switch 2 supports VLAN 10, maps to NIC 1, and maps to all VMs.
• D.Virtual switch 1 supports VLAN 10, maps to NIC 1, and maps to VMs 1 through 5. Virtual switch 2 supports VLAN 20, maps to NIC 2, and maps to VMs 6 through 8.

A customer needs a storage solution that uses the current IP network and delivers data to serves in the manner of a file server. Which family of solution meets this need?

• A.HP Virtual Library Systems (VLS)
• B.HP 3PAR 10000 storage arrays
• C.HP P6000 Enterprise Virtual Array (EVA) disk arrays.
• D.HP IBRIX X9000 Network Attached Storage (NAS)

A network architect needs to schedule a network outage for migrating to a new HP solution.
What primarily determines the maximum length for the outage?

• A.Scope negotiated with customer for user acceptance tests (UATs)
• B.Valid maintenance windows for any affected applications
• C.Time for racking all equipment, configuring all network settings, and completing all user acceptance tests (UATs).
• D.Migration time plus time for testing