Online Access Free HP0-Y51 Exam Questions

Table of Acronyms An administrator has configured an HP Comware switch to support FCoE in Fibre Channel Forwarder (FCF) mode. A switch interface, ten1/0/1, connects to a sewer FC host bus adapter (HBA), The HBA should send storage traffic in VSAN 2, which is associated with VLAN 20.

How should the administrator assign FC traffic for this HBA to VSAN 2?

• A.By accessing the VSAN 2 configuration view and adding ten1/0/1 as a trunk port
• B.By accessing the VLAN 20 configuration view and specifying ten1/0/1 as a member port of the VLAN
• C.By binding a VFC interface to ten1/0/1 and specifying VSAN 2 as the VFC interface trunk VSAN
• D.By configuring ten1/0/1 as an F-mode FC port and specifying VSAN2 as the port access VSAN

Table of Acronyms

Refer to the exhibit.

The switches shown in the exhibit form a TRILL region. What helps to load balance traffic across
the .inks between these switches?

• A.VLANs 10, 20, and 30 are mapped to different spanning tree instances.
• B.The switch-to-switch links are configured to permit at least two VLANs.
• C.Switch 4 and Switch 5 are assigned the same Designated RBridge (DRB) priority.
• D.The TRILL cost for each link is the same, and TRILL Equal Cost Multi-Path (ECMP) is enabled.

Table of Acronyms

Refer to the exhibit.

The switch shown in the exhibit should from a TRILL region. For Switch 1 interface ten1/0/22, what is a valid port link-type and TRILL port type?

• A.port link type = trunk port that permits VLMs 10 and 20 TRILL- port type = TRILL access port
• B.port link type = access port in any VLAN TRILL port type = TRILL trunk port
• C.port link type = hybrid port with untagged VLANs 10 and 20 TRILL port type = TRILL hybrid port
• D.port link type = access port in any VLAN TRILL port type = TRILL access port

A company has HP MultiService Mobility (MSM) APs that receive DHCP addresses on several different subnets. The APs are controlled by an MSM Controller. The company is considering replacing the MSM Controller with a Unified Wired-Wireless controller. The administrator runs a proof of concept test in which some of these APs are discovered and controlled by the Unified Wired-Wireless controller. Now the administrator wants to return the APs to being controlled by the MSM Controller.
The network administrator performs these actions:
-Ensures that the Colubris vendor-specific option in each AP subnet DHCP scope references the
MSM Controller IP address -Reboots the APs. The MSM Controller never succeeds in discovering the APs. A debug reveals that the APs are not contacting the controller at all.
Which action could fix this problem?

• A.Add a DNS host entry that maps hp example com to 10.1.10.20.
• B.Upload MSM software to the HP Wired-Wireless controller flash.
• C.Reset the APs to the factory default settings
• D.In each AP DHCP scope, delete the Colubris vendor-specific option

A company has an HP BYOD solution. The administrator is setting up synchronization of user accounts from Active Directory (AD). The administrator wants User Access Manager (UAM) to organize the user accounts in groups in the same way that AD does.
How does the administrator configure this to accomplish the goal?

• A.In the LDAP Server policy, set the User Group setting to Synchronize by OU, which allows AD to create the groups automatically
• B.Install the UAM agent on the AD server, otherwise, UAM can only synchronize the highest-level group of domain users.
• C.Establish the LDAP synchronization policy, and then create a user group policy to synchronize the groups and sort the user accounts
• D.Create every group before setting up the LDAP synchronization policy