Online Access Free HP2-K35 Exam Questions

A customer wants to use the new HP StoreOnce VSA as the primary backup target on an HP ProLiant DL380 Gen8. What is required to implement this solution?

• A.Fibre Channel based SAN infrastructure
• B.Minimum of 1TB internal storage for the data disk
• C.64 GB memory allocated to the HP StoreOnce VM
• D.One Catalyst license per physical hardware and one per HP StoreOnce VSA

How do the HP StoreOnce Backup System Virtual Tape Devices appear to the host?

• A.remote-attached physical tape library or autoloader
• B.locally-attached physical tape library or autoloader
• C.network-attached physical tape library or autoloader
• D.loosely-attached physical tape library or autoloader

A customer has two new HP StoreOnce 4420 G3 Backup Systems. When integrating the devices into the current backup infrastructure, what do you need to consider regarding the network configuration?

• A.There may be up to eight configuration files on any HP StoreOnce Backup System; only two of them are active at onetime.
• B.The default configuration must be modified or deleted in order to become the current configuration.
• C.There are two fixed configuration filenames reserved for the system: Factory_Default_Configuration and current.
• D.There are four stages to apply a new network configuration: create the configuration file, validate, backup, and activate the file.

After deploying an HP StoreOnce VSA through a vSphere OVF template, what must you do to finalize the configuration?

• A.Wait 15 to 20 minutes for the network to automatically configure.
• B.Start <<net set wizard>> through CLI to complete the network configuration.
• C.After the deployment, reboot the VM to activate the NIC and set the configuration.
• D.Launch the GUI, set the IP, subnet, and DNS, and then activate the vNIC.

Which function should NOT be performed through the HP StoreOnce device's iLO port?

• A.remote console access
• B.hardware failure reporting
• C.virtual power button shut down
• D.network gateway assignment