Online Access Free HP2-K36 Exam Questions

You are demonstrating to your customer how to configure a number of scheduled snapshots.
Once configured, you notice that the scheduled snapshots are not created. What could be causing the issue?

• A.Insufficient capacity exists in the cluster for the desired number of snapshots.
• B.The scheduler task has not been configured.
• C.Multiple scheduled snapshots cannot be configured simultaneously.
• D.The logged-on user does not have rights to run scheduled snapshots.

In the HP StoreVirtual 4000 SAN, what is the initial iSCSI communication process when VIP Load Balancing is selected?

• A.It is processed in a round robin manner to each storage system.
• B.It is load balanced across all storage systems over the iSCSI subnet.
• C.It always goes to the master node in the cluster and remains there.
• D.It goes through only one storage system, then redirects to the least busy one.

Your customer has an HP StoreVirtual 4000 Storage system that contains approximately 25 TB of data. The customer asks you to plan a disaster-tolerant solution that replicates to a remote site approximately 100 miles away. Their WAN is a 10 MB link with variable latency.
What is the most efficient procedure to recommend to your customer?

• A.Perform a backup, take it to the remote site, perform a restore, and then update delta points.
• B.Schedule the replication links to 100% capacity during low business activity times.
• C.Upgrade their WAN to a minimum of 100 MB.
• D.Do the initial synchronization at the primary site.

A media and broadcasting customer has an HP StoreVirtual 4000 Storage environment with eight 4530 SAS nodes. Approximately 50% of the I/O is large sequential; therefore, the configuration is set for maximum performance. After replacing a defective network switch, the customer experiences performance and connectivity issues and asks you to solve the problem.
What should you investigate first?

• A.If Active/Passive (A/P) bonding is enabled
• B.If the switch has the actual firmware installed
• C.If jumbo frames are enabled on the whole path
• D.If Spanning Tree Protocol (STP) is enabled

Which HP StoreVirtual functionality provides customers with the ability to remove existing storage nodes from a cluster and replace them with new storage nodes online, with no loss of data or data availability?

• A.Remote Copy
• B.Peer Persistence
• C.Online Import
• D.Cluster Swap