Online Access Free HP2-Z18 Exam Questions

You must configure link aggregation on an HP E-Series switch with standby links to provide for link redundancy. Which technology is required for this configuration?

• A.distributed trunking
• B.dynamic LACP
• C.static LACP
• D.HP port trunking

You have defined port 1 /0/2 on an HP A7500 switch as a trunk port with VL ANS 1,10,20.30 permitted What i s the effect of the following command?
[A7500-GigabitEthernetl/0/2] port trunk pvid vlan 30

• A.The port will carry VLAN 30 as an untagged VLAN; all others will be tagged.
• B.The port will use VLAN 30 as its default VLAN and will no longer forward VLAN 1 packets.
• C.The port will be added to VLAN 30 as a tagged member
• D.The port will be reconfigured as a hybrid port carrying VLAN 1 and VLAN 30 as untagged VLANs.

You have configured Multiple Spanning Tree Protocol (MSTP) on two HP E8212 zl switches and four E5406 zl switches, but they have not joined the same MST region. Which configuration parameters should you verify to ensure all switches join the same region? (Select three)

• A.BPDU Protection settings
• B.VLAN-to-instance mappings
• C.bridge priorities
• D.port priorities
• E.configuration revision
• F.configuration name

What is the VLAN status of the ports on an HP A-Series switch at factory default settings?

• A.All ports are access ports using VLAN 1 as their default VLAN.
• B.VLANs are unassigned until a port mode is defined.
• C.All ports are trunk ports using VLAN 1 as their default VLAN
• D.All ports are in a learning state waiting for VLAN assignment through GVRP.

Which A-Series switch is designed for the aggregation layer of data centers?

• A.A12508
• B.A5800
• C.A9500
• D.A12518