Online Access Free HP2-Z32 Exam Questions

What is one factor that a wireless network designer must consider when estimating path loss between an AP and a client?

• A.The client receiver sensitivity
• B.The transmit power of the AP
• C.The antenna gain
• D.The type of environmental obstruction

A company CEO hears about Hole 196 and is concerned that WPA/WPA2 will not protect the company's wireless communications from eavesdroppers.
Which statement accurately describes this vulnerability?

• A.Hole 196 exploits a weakness in the WPA encryption algorithm but does not compromise WPA2.
• B.Hole 196 allows an unauthorized user to spoof MAC addresses and detect the Group Transient Key (GTK).
• C.Hole 196 exploits a weakness in both the WPA/WPA2 encryption algorithm, but a user can download a patch from their station or AP vendor.
• D.Hole 196 allows malicious authorized users to implement attacks such as ARP poisoning.

A company has an HP MSM solution. The HP MSM APs deployed at one site are managed by HP MSM Controller. The HP MSM Controller is deployed at another site. The APs
tunnel client data traffic to the controller.
Which guideline should the network administrator follow to ensure the solution works correctly?

• A.The tunnels must terminate on the controller's IP address in its untagged LAN port interface Get Latest & or for an MSM720 its Access network.
• B.Because the tunnel cannot be established on a tagged VLAN, the egress network in the VSC binding of the APs must not be configured.
• C.Any firewall between the APs and the controller must permit traffic destined to the controller on UDP ports 3000 and 3001.
• D.No firewall between the APs and the controller can implement NAT.

You have decided to limit access to the management GUI to clients on your local network.
This requires you to select which item from Active interfaces on your Management screen?

• A.Internet port
• B.VPN
• C.VLAN/GRE item
• D.LAN port

A network administrator wants to use a dedicated link for teaming communications between two HP MSM720 Controllers. In each MSM720's teaming settings, the administrator selects port 4 and sets the VLAN ID to 101. What is the correct setting for the port 4 network profile?

• A.A network profile without a VLAN ID
• B.The default network profile (Access network)
• C.A network profile with VLAN ID 101
• D.A network profile with a VLAN ID that is not used in any another profile